6 Inch Water Suction Discharge Hose 10 Bar (DN150) for Oil Drilling Platforms

WORKING PRESSURE 10 BAR | 40 METERS LENGTH | SWIVEL & FIXED FLANGE DN150 | CS FERRULE

Industrial Water Transfer Solutions for Central European Drilling Operations

Reliable fluid handling infrastructure is a core requirement on active drilling sites, where continuous water intake and discharge take place under changing environmental conditions. Shanghai PME Industrial manufactures and supplies industrial water suction discharge hose assemblies engineered for consistent performance in both vacuum suction and pressurized discharge applications.

Our recent production batch features the 6 inch suction discharge hose 10 bar configuration (DN150) supplied in continuous 40-meter lengths for oil drilling platforms across Central Europe. Built with a smooth black rubber tube, high textile plies and steel wire embedded reinforcement, and a weather and abrasion resistant rubber cover, each assembly is fitted with a Swivel Flange Hose Shank DN150, a Fixed Flange Hose Shank DN150, and carbon steel (CS) ferrules.

In addition to the 6-inch DN150 model, our manufacturing line supports full-range sizing across 3″, 4″, 5″, and 8″ inner diameters, paired with corresponding DN75, DN100, DN125, and DN200 flange couplings or alternative mechanical end connections to match specific manifold layouts.

6 inch suction discharge hose 10 bar production line with steel wire reinforced rubber construction
WP 10 Bar Production Line

Manufacturing of 6″ (DN150) steel wire reinforced suction hose in 40-meter continuous lengths.

Rubber water suction hose DN150 fitted with Swivel Flange Hose Shank DN 150 and CS ferrule
Swivel Flange Hose Shank DN 150

Rotating bolt-ring flange assembly allowing bolt-hole alignment without twisting the hose body.

Flange suction discharge hose equipped with Fixed Flange Hose Shank DN 150 for oil drilling platforms
Fixed Flange Hose Shank DN 150

Rigid flange shank crimped with a CS ferrule for stationary manifold connections.

Flange Couplings, CS Ferrules & Multi-Standard End Fittings

For our rubber water suction hose DN150 assemblies destined for Central European drilling rigs, coupling selection focuses on leak-free alignment and mechanical retention:

  • Swivel Flange Hose Shank DN150: Equipped with a freely rotating bolt ring around the machined hose shank. During field installation on pumps or manifold headers, crews can align flange bolt holes smoothly without applying torsional stress to the 40-meter hose.
  • Fixed Flange Hose Shank DN150: Features a solid, non-rotating flange welded or machined integrally with the hose tail, providing a rigid mechanical anchor at fixed tank outlets or pump discharge ports.
  • CS Ferrule Crimping System: Both DN150 flange shanks are permanently secured onto the hose ends using crimped carbon steel (CS) ferrules, creating a uniform compression seal capable of holding full 10 Bar working pressure.
  • Alternative Coupling Options: Beyond standard flange couplings, our flange suction discharge hose assemblies can be fitted with Hammer Unions, Male thread nipples, and Camlock quick-disconnect couplings upon request.

Technical Specifications & Available Size Range (3″ to 8″)

While the 6″ (DN150) 40-meter assembly represents our primary configuration for high-volume rig water transfer, Shanghai PME Industrial supplies a complete size matrix rated at 10 Bar working pressure:

Nominal Size (Inch) Flange Coupling Size Working Pressure Standard Length Options Available End Fittings
3 Inch DN75 10 Bar 10m / 20m / 40m Swivel/Fixed Flange, Camlock, Male Thread
4 Inch DN100 10 Bar 10m / 20m / 40m Swivel/Fixed Flange, Hammer Union, Camlock
5 Inch DN125 10 Bar 10m / 20m / 40m Swivel/Fixed Flange, Male Thread, Hammer Union
6 Inch (Featured) DN150 10 Bar 40 Meters (Continuous) Swivel Flange + Fixed Flange + CS Ferrule
8 Inch DN200 10 Bar 10m / 20m / 40m Swivel/Fixed Flange, Hammer Union

Applications for Oil Drilling Platform Water Transfer in Central Europe

An oil drilling platform water hose serves multiple operational circuits across onshore exploration and production sites in Central Europe:

  • Raw Water Intake & Supply: Drawing water from local storage pits, holding tanks, or surface water reservoirs to supply rig utility systems without suction line collapse.
  • Long-Span Pressurized Discharge: Utilizing continuous 40-meter lengths reduces intermediate flange joints across rig yards, minimizing potential leak points during high-volume water transfer at 10 Bar working pressure.
  • Site Dewatering & Fluid Transfer: Handling water evacuation and utility fluid routing between temporary storage tanks during rig mobilization and drilling phases.

Manufacturing Standards & Export Packaging for Bulk Orders

Every 40-meter length of 6 inch suction discharge hose 10 bar undergoes dimensional verification, visual inspection of the black rubber tube and weather and abrasion resistant rubber cover, and pressure testing after CS ferrule crimping to verify coupling integrity.

For international freight to Central European ports and inland drilling hubs, hoses are coiled according to bend radius guidelines, fitted with flange face protectors to prevent sealing surface damage, and secured on pallets or wooden crates for container transit.