Figure 206 Hose Barb Coupling (1″ to 10″) for North American Oilfield Slurry & Water Lines

FORGED STEEL CONSTRUCTION | WECO TYPE FIG 206 | 2,000 PSI CWP | BULK DISTRIBUTOR SUPPLY

Forged Hammer Union Hose Couplings for Bulk Oilfield Procurement

Low-pressure fluid transfer across hydraulic fracturing spreads, drilling mud pits, and water supply manifolds requires durable end connections that can be assembled and broken down rapidly in the field. Shanghai PME Industrial manufactures and supplies the Figure 206 hose barb coupling—also specified across North American oilfields as a FIG206 Hose Barb Frac Fitting, Figure 206 Barbed Hammer Union, Fig. 206 Hose Shank Hammer Union, Hose Nipple Stem with Figure 206 Union, and Weco Type Figure 206 Hose Barb Coupling.

Produced via closed-die forging and precision CNC machining, our forged hose barb coupling oilfield assemblies are engineered to handle abrasive frac water, drilling mud, cement slurry, and general utility fluids at up to 2,000 PSI cold working pressure (CWP). Covering a complete nominal diameter range from 1″ through 10″—including high-volume 8″ assemblies—this product line is structured for bulk inventory stocking by North American drilling contractors, hose assemblers, and oilfield equipment distributors.

Each coupling combines a multi-serrated hose shank stem with standard Figure 206 hammer union ends (female thread sub, male sub, and forged three-lug wing nut) to provide reliable hose retention and union makeup.

Figure 206 hose barb coupling 8 inch forged male sub with barbed hose shank
8″ Fig. 206 Male Sub

8″ forged male hose nipple stem featuring machined barb serrations for hose connection.

FIG206 hose shank hammer union 8 inch female ACME thread sub
8″ Fig. 206 Female Sub

8″ forged female ACME thread sub with machined mating face and barbed shank for hose insertion.

Weco type Figure 206 hose barb 8 inch forged wing nut for hammer union assembly
8″ Fig. 206 Wing Nut

Forged three-lug hammer nut machined to Weco type Figure 206 ACME thread tolerances.

Barbed hammer union FIG 206 8 inch forged male stem for frac water hoses
8″ FIG206 Barb Coupling

Side profile of the 8″ forged hose barb coupling showing shank length and retention ridges.

Technical Specifications & Complete Size Matrix (1″ to 10″)

Our barbed hammer union FIG 206 couplings are available across eight standard nominal bore sizes to match small auxiliary lines up to large-diameter bulk water transfer hoses:

Nominal Size (Inch) Union Figure Cold Working Pressure Test Pressure Available Configurations
1 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
2 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
3 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
4 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
5 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
6 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
8 Inch (Featured) Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub
10 Inch Figure 206 2,000 PSI 3,000 PSI Complete Union, Male Sub + Nut, Female Sub

Oilfield Applications for Figure 206 Hose Barb Couplings

Across major North American shale plays—including the Permian Basin, Eagle Ford, Bakken, and Haynesville—the Figure 206 hose barb coupling serves as a standard connection for low-to-medium pressure flexible hose lines:

  • Frac Water Supply & Transfer Lines: Connecting large-bore 6″, 8″, and 10″ flexible water hoses between frac tanks, hydration units, and blender manifolds.
  • Drilling Mud & Slurry Suction/Discharge: Providing quick-connect hammer union ends on rubber mud hoses used in active mud pit circulation and transfer pumps.
  • Cementing & Bulk Fluid Blending: Linking low-pressure mixing water and chemical additive lines where rapid rig-up and teardown reduce non-productive time.
  • Oilfield Hose Assembly Manufacturing: Supplied as loose male subs, female subs, and wing nuts to industrial hose distributors fabricating custom-length frac fitting hose nipple and suction hose assemblies.

Quality Assurance & Wholesale Packaging for Distributors

Shanghai PME Industrial supports high-volume procurement programs with standardized quality control across every production batch. All forged components undergo raw material verification, heat treatment, and 100% thread and barb dimensional inspection. Standard color-coded protective coatings (typically blue sub with grey or red wing nut, or customer-specified finishes) provide immediate visual identification on the rig floor.

For bulk sea and air shipments to North American ports, couplings are coated with anti-rust oil, fitted with thread protectors, and packed in reinforced plywood crates or steel pallets sorted by size and part type (Male Sub, Female Sub, Wing Nut, or Complete Assembly) to streamline warehouse receiving.

Inquire About Bulk Figure 206 Hose Barb Couplings

Shanghai PME Industrial manufactures forged Figure 206 hose barb coupling assemblies and spare components in sizes 1″, 2″, 3″, 4″, 5″, 6″, 8″, and 10″. Contact our sales engineering team for wholesale pricing, dimensional drawings, and lead times.

Forged Hammer Unions & Oilfield Hose Fittings

Contact Technical Sales
Explore the full range of PME Flow Control Products and oilfield equipment, manufactured in accordance with API standards. From high-pressure flowlines and manifolds to API 7K/16C/16D certified hoses, PME Shanghai provides integrated solutions for global energy sectors.