Safety Whip Check Whip Resistant for High Pressure Hose and Pipeline
PME safety whip check, also known as Cable Whip Check, Whip Sock or Hose Restraint, is an essential safety device to prevent hose and pipeline failure and ensure safety in high pressure application.
PME Whip Check is a simple but vital safety restraint made of braided steel wire with spring-loaded loops or thimbles at each end. When installed correctly across a hose coupling, it acts as a secondary safety measure.
Should a primary connection fail or a hose rupture under high pressure, PME Whip Check absorbs and restrains the sudden, violent whipping action of the disconnected hose, preventing injury to personnel and damage to nearby equipment.
PME Hose safety wire is for any hose-to-hose and hose-to-outlet connection. It can help minimize injury to personnel and damage to machinery, and can aid in reaching certain safety standards.
Galvanized steel spring loaded wire nooses can easily be opened up to grip the hose firmly. Simple loop-to-loop or eye-to-eye attachment makes installation quick without the need for specialized tools.
Available in various lengths and diameters, PME safety whip check accommodate a wide range of hose sizes from ½” to 3 ½” and pressure ratings. Different hoses in oil and gas (drilling, fracking, well services, and fluid transfer) require different check
To ensure you select the correct whip check restraint for your application, key parameters include:
Material :Galvanized Steel or Stainless Steel (for corrosive environments)
Hose Outer Diameter (O.D.) : The range of hose O.D. the check is designed to fit (e.g., 1/2″ to 3-1/2″)
Cable Diameter: The diameter of the wire rope (affects load capacity)
Hose-to-Hose or Hose-to-Equipment : Specific configurations for connecting two hoses or a hose to a fixed connection.


