Precautions for using rubber hoses: Be sure to use rubber hose within the recommended temperature and pressure range. What is the rubber hose standard? The hose will expand and shrink with its internal pressure, and cut the hose into a slightly longer length than you need.
When applying pressure, slowly switch any valve to avoid shock pressure. What is the rubber hose standard? Rubber hose should be used under the conditions of its bending radius, otherwise it will cause the hose to break, reduce the pressure.
When using powder or granules, it is possible to produce a wearable radius according to the conditions, and to enlarge the bending radius of the hose as much as possible. What is the rubber hose standard? Do not use metal parts in extremely bent state.
Do not touch the hose directly or near the open flame. What is the rubber hose standard? Do not press the hose with the vehicle.
Precautions when assembling: Please select the hose connector for hose size. What is the rubber hose standard? When inserting the tube tail part of the joint into the hose, apply oil to the hose and pipe tail. If you can not insert, you can use hot water heating hose inserted into the connector.
Insert the serrated part of the joint completely into the hose. What is the rubber hose standard? Do not use a pushable fitting in the hose, which can cause the hose to break. Do not use excessive wire ligation, please choose a special sleeve or tie. Excessive ligation will make the hose flaws also prone to rust.
Precautions for inspection:
Before use Check: Before using the hose, please confirm the appearance of the hose with or without abnormal trauma, hardening, softening, discoloration and so on. Periodic inspection: During the use of the hose, be sure to carry out a regular inspection once a month.